Description
• High-accuracy pocket pH tester with a dual display LCD.
• Flat surface pH electrode is suitable for semisolids and flat surface pH measurements.
• 1 to 3 points calibration with automatic recognition for USA and NIST buffers.
• Automatic temperature compensation ensures accurate readings over the entire range.
• Auto-Read function senses and locks the measurement endpoint.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows to set the pH buffer group, number of calibration points, temperature unit, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Replaceable electrode module reduces maintenance and replacement cost.
• Waterproof feature to ensure complete protection in harsh environments.
Specifications
| Model | PH-P30F |
| pH | |
| Range | -1.00 to 15.00pH |
| Resolution | 0.01pH |
| Accuracy | ±0.01pH |
| Calibration Points | 1 to 3 points |
| pH Buffer Options | USA (pH4.01/7.00/10.01), NIST (pH4.01/6.86/9.18) |
| Temperature | |
| Range | 0 to 60°C/32 to 140°F |
| Resolution | 0.1°C/0.1°F |
| Accuracy | ±1°C/±1.8°F |
| Offset Calibration | 1 point |
| Calibration Range | Reading ±10°C |
| General Specifications | |
| Temperature Compensation | 0 to 60°C/32 to 140°F, automatic |
| Hold Function | Manual or auto-endpoint |
| Auto-Power Off | 8 minutes after the last key is pressed |
| Display | Dual-line LCD (21×21mm) |
| Power | 2×1.5V AAA batteries |
| Battery Life | Approximately 200 hours of continuous use |
| Dimensions | 185(L)×40(Dia.)mm |
| Weight | 100g |
